Welcome to Shenzhen Nuo Heng Xing Technology Co., Ltd

Knowledge

Contact Us

You are here:Home >> Knowledge

Knowledge

Application of Industrial Endoscope in Grinding Machine Inspection

Time:2016-10-27 Views:8

Application of Industrial Endoscope in Grinding Machine Inspection

Industrial endoscopes have been developed for many years and can help us detect more complex instruments such as grinding machines. Grinding machines are widely used in industry. They play an important role in industrial manufacturing processes, but the internal structure is very complicated. Traditional fault detection is more troublesome. Using industrial endoscopy camera, it will be more effective.

After the long-term work of the grinding machine, the most common faults are the main engine and electrical faults. The main engine fault is mainly caused by mechanical installation, debugging and operation irregularities. The electrical fault is relatively simple, because the grinder has an automatic diagnostic function installed inside. The fault can be checked out according to the diagnostic report.The traditional solution is to disassemble the grinding machine and to check, but this method will only can check the disassembled parts, the bearings of the machine can not be detected by this method, and there is a very bad disadvantages to the disassembling of the machine parts. The drawback is that it is easy to destroy the parts during the disassembly process. With the increasing of and the number of disassemble. The frequency of the failure of the grinding machine will become more and more, and the bearing parts that really need to be tested have not been repaired, resulting in the frequent failure or crash, you will not lose more.

In order to solve this problem better, manufacturers can use industrial endoscope camera to perform non-destructive inspection without disassembling the grinding machine.The NUOHX industrial endoscope camera uses a titanium alloy probe, it can keep working for long time. The inspector can observe the wear inside the grinder through the display on the industrial endoscope camera. Even the bearing of the grinder,it can be viewed from the perspective of the industrial endoscope. Observing the inside situation, transmitted to the display screen accurately. At the same time, the industrial endoscope camera has a very powerful function, which is photographing and recording. It can take photos and video inside the grinder in real time, and formulate corresponding conditions according to the internal conditions of the grinder. The solution is simple, save time, and it is a very practical industrial testing equipment.
  • Previous:Nothing
  • Next:Industrial endoscope detection application  2016/11/09