Welcome to Shenzhen Nuo Heng Xing Technology Co., Ltd

Knowledge

Contact Us

You are here:Home >> Knowledge

Knowledge

Industrial endoscope detection application

Time:2016-11-09 Views:14

Industrial endoscope detection range

At present, non-destructive testing methods commonly used are: visual inspection (VT), radiographic inspection (RT), ultrasonic inspection (UT), magnetic particle inspection (MT) and liquid permeation detection (PT). while Industrial endoscopy is the most common method of nondestructive testing.

Other non-destructive testing methods: eddy current testing (ET), acoustic emission testing (AT), thermal image/infrared (TIR), leak test (LT), AC field measurement technology (ACFMT), magnetic flux leakage test (MFL), far field test Detection method (RFT), etc.

Among them, industrial endoscope camera non-destructive testing, the scope of visual inspection includes the following aspects:
1. The inside of the object being inspected, cracks, spots, foreign objects and corrosion and size on the surface.

2. Internal inspection of pipelines, is mainly for the defects of cracks, wires, scratches, bumps, foreign bodies and corrosion on the internal surface, and relevant tests are carried out to avoid the accidents.

3. For some weld surface, the welder is observed in some sorts of welds. The surface of the weld is tested. The surface is mainly cracked or there is no weld. That is why the test need to be carried out.

4. Detection of foreign matter inside the pipeline. Large-scale machines often keep running for a long time. There accumulated of a lot of foreign materials and residual debris such as residual internal debris internal, if not cleaned up timely, it is easy to cause safety hazards such as squibs for many years.

5. Do non-destructive testing when some mechanical components is under operating.

6. Corrosion problem, in the light of the front end of the endoscope camera, zoom in on some important parts and the matte surface, then observe the corrosion of those tiny irregularities.

NUOHX industrial endoscope can be used for the detection and observation of places that can not be observed directly by the human eyes. It is mainly used in automobiles, aero engines, pipes, mechanical parts, etc., and can be realized without disassembling or destroying the assembly or stopping the operation of the equipment.On the other hand, industrial endoscopes can be connected to cameras, video cameras or electronic computers to form camera, video and image processing systems for monitoring, recording, storage and image analysis of field of view targets. Provides a good guarantee for diagnosis and processing.